CCNA Wireless Practice Test 2 IUWNE 640-722 CCNA Wireless Practice Test 2 IUWNE 640-722 Which 1 should be used to contain visitors and transient users of a wireless network? a. WPA2 enterprise b. Guest WLAN c. One-time WEP d. Broadcast SSID By default, which of the following are methods you can use to access a wireless LAN controller? a. SSH b. HTTPS c. Console port d. All the above Which one of the following is the frame type sent to discover APs within the signal range of a wireless client? a. Scan b. Probe c. Beacon d. Discovery Wireless LAN operation is defined in a. 802.1 b. 802.2 c. 802.3 d. 802.11 Which comes first in a LAP’s state machine, after it boots? a. CAPWAP b. Discover WLCs c. Download a driver d. Join a WLC To save a copy of a controller’s configuration you should a. Commands > Upload File & The show running-config CLI command b. Commands > Download File & The show running-config CLI command c. The copy config tftp CLI command and the show running-config CLI command d. All are incorrect CUWN architecture consists of two controllers and a number of APs. Each AP is configured with one controller as primary and the other controller as secondary. Which one of the following is being used? a. No redundancy b. N+1 redundancy c. N+N redundancy d. N+N+1 redundancy Which term describes a Cisco wireless access point that works in a standalone, independent manner? a. Autonomous AP b. Independent AP c. Lightweight AP d. Embedded AP Which one of the following will an AP try first in order to select a controller to join? a. Master controller b. Least-loaded controller c. Primed address d. DHCP option 43 What is required for a lightweight AP in default local mode to be able to support three SSIDs that are bound to three VLANs? a. A trunk link carrying three VLANs b. An access link bound to a single VLAN c. A WLC connected to three VLANs d. A CAPWAP tunnel to a WLC Loading … Question 1 of 10
